In todays world we know how important it is to make sure all Health & Safety regulations are followed to the letter. Unfortunately some companies leave themselves wide open by not training their employees correctly
​
The Health & Safety at Work 1974 Section 2 States it is the employers responsibility for information, supervision and training
​
PUWER 1998 ( Prevision of Use of Work Equipment Regulation) states that anyone using work equipment must be trained.
​
Lift-truck training
​
It is important that employers ensure that lift-truck operators are trained to the standards outlined in the Rider-operated lift trucks ACOP L117, whether using in-house trainers or external training providers.
Fork lift truck training may be provided by an organisation which is:
-
a member, or part, of a voluntary accredited body
-
awarding organisations subject to other quality assured regimes
-
independent, including in-house provision
It is not mandatory for training organisations to be part of a voluntary accredited body, or other quality assured schemes but such bodies and schemes are intended to:
-
help set and maintain professional training standards
-
help employers select training organisations or lift-truck suppliers who offer a good standard of training
Although being part of such a scheme is voluntary, their use by an employer provides some assurance that the training provided will be at least to the standard described in the ACOP and guidance.
Any competent organisation or training provider will be able to provide details of appropriately qualified and experienced trainers to enquirers who seek advice about lift-truck training, along with a description of their assessment criteria.
Any competent trainer or training provider can provide advice on workplace transport training.
What should training include?
Operator training should always include three stages:
-
Basic training: the basic skills and knowledge required to operate a lift truck safely and efficiently.
-
Specific job training: knowledge and understanding of the operating principles and controls of the lift truck to be used and how it will be used in their workplace.
-
Familiarisation training: applying what has been learnt, under normal working conditions, on the job.
Basic and specific job training, which can be combined, should take place off the job (ie away from production and other pressures). Familiarisation training needs to be done on the job, under close supervision. The Rider-operated lift trucks ACOP L117 provides more details on what each stage involves.
How long should a basic training course last?
It is difficult to specify how long a course should last as there are many issues which affect the rate of learning. Courses should be long enough to meet the requirements of Appendix 1 and Appendix 2 of the L117 ACOP (typically 3-5 days).
Operators with some experience of lift trucks or relevant experience of similar vehicles may need less extensive training than those with no experience, however, do not overestimate the value of such experience. An operator with basic training on one type of lift truck or handling attachment cannot safely operate others, on which they have not been trained, without additional conversion training.
​
Training ratios
​
The ratio of trainee: instructor: truck should enable the instructor to demonstrate each part of the practical training and enable the trainee to obtain adequate hands-on experience (for example a maximum of 3:1:1, except for theory sessions). There should be enough time for each trainee to have enough practical experience to become a safe operator and to do so under close supervision.
Testing
The instructor should continuously assess a trainee’s progress to ensure they achieve the required standards throughout training. At the end of the training, the trainee should pass a test, or tests, to demonstrate that they have the necessary practical and theoretical knowledge and skills to operate lift trucks safely.
It is essential that newly trained operators are given specific job and familiarisation training as well as basic training. Once they have completed the three stages of training, you should give operators, including occasional users, the opportunity to put the skills and knowledge acquired during training into practice at the workplace to reinforce that training.
Monitoring and assessment
Lift-truck operators, even those who are trained and experienced, need to be routinely monitored in the workplace and, where necessary, retested or refresher trained to make sure they continue to operate lift trucks safely.
You can identify the need for further training using a formal monitoring and assessment process, carried out by a suitably competent person, such as an instructor. Formally timetable this assessment (for example a retest) to make sure it is done at reasonable intervals. Where an operator fails this assessment, arrange further training for them. You may find it useful to record these assessments in operators’ personnel records.
Refresher training
​
Regular refresher training will ensure operators:
-
maintain good driving habits
-
learn new skills where appropriate
-
reassess their abilities
Refresher training or retesting might also be appropriate where operators:
-
have not used trucks for some time
-
are occasional users
-
appear to have developed unsafe working practices
-
have had an accident or near miss
-
have changed their working practices or environment
-
​
How often do I need to provide refresher training?
​
There is no specific time period after which you need to provide refresher training or formal assessment. However, you may decide that automatic refresher training or a retest after a set period (for example 3-5 years) is the best way to make sure employees remain competent. Where you adopt this approach, you will still need to monitor performance, in case operators need extra training before the set period ends.
The length of a refresher training course will be set by assessment of the operators to identify shortcomings and any unsafe habits which need correction. It is not, therefore, possible to advise on the length of refresher training. However, it is unlikely that refresher courses of less than one day will be effective.
​
Operator training should always include three stages:
​
-
Basic training: the basic skills and knowledge required to operate a lift truck safely and efficiently.
-
​
-
Specific job training: knowledge and understanding of the operating principles and controls of the lift truck to be used and how it will be used in their workplace.
-
Familiarisation training: applying what has been learnt, under normal working conditions, on the job.
-
​
Basic and specific job training, which can be combined, should take place off the job (ie away from production and other pressures). Familiarisation training needs to be done on the job, under close supervision. The Rider-operated lift trucks ACOP L117 provides more details on what each stage involves.
​
​
​
​
​
​
​
​
​
​
​
​
​